Our Accessories & Spares have been designed to ensure the highest quality dispense with style and elegance. The addition of the locking grub screw at the base of the handle ensures the handle stays in the correct position so your brand is always a focus. If you require further information please get in touch.
Stainless steel creamer nozzle for cream flow products such as Guinness.
Plain nozzle no creamer £6.95 +VAT
Nozzle with Creamer £7.95 +VAT
P&P to be quoted on order
C-Spanner tool for releasing and tightening taps from fonts.
£6.95 +VAT
P&P to be quoted on order
Tap shank extension, various sizes depending on wall depth.
Starts at £14.95 +VAT
P&P to be quoted on order
£9.95 +VAT
Large Metered FOB – EKD with reed switch for MDU
£178.50 + VAT
P&P to be quoted on order.
Solenoid assembly complete for MDU, comes with two pin connector and locking nut
£84.95 + VAT
P&P to be quoted on order.
Installation kit required for installing MDU, for further info refer to installation manual
£45.95 + VAT
P&P to be quoted on order.
24 volt power pack, pre-set for the V6 and V12 MDU, requires kettle lead, for further info refer to data sheet below.
£80.85 +VAT
P&P to be quoted on order
GST120A24-P1M is GS120 series 120W AC-DC industrial adaptor. It complies with EISA 2007, NRCan, AU/NZ MEPS and EU ErP. It includes short circuit, overload, over voltage, over temperature. Approved by UL60950-1, CSA C22.2, TUV EN60950-1, PSE J60950-1 (except for 48V).
Spares repair kit for MDU, for further info refer to manual
£99.75 + VAT
P&P to be quoted on order.
Creamer Nozzle complete, ready to use, insert the 5/16″ tube end into the Solenoid and serve, enables to swap between a lager and cream flow product.
£27.30 + VAT Single
£163.80 + VAT Set of six
P&P to be quoted on order.
Lager/Cider nozzle tube replacement, insert into the 5/15″ fitting on the solenoid, can be removed for cleaning or swapping with a cream flow nozzle.
£7.35 +VAT single
£39.95 +VAT set of six
P&P to be quoted on order.
Manufactured from, 316 stainless steel, meeting the requirements of food industry standards.
£6.95 +VAT
P&P to be quoted on order
Inox spray is a high quality stainless steel cleaner to keep your unit in best condition and look. Will protect against stains and grease marks, for further info refer to technical data sheet.
£9.95 +VAT
P&P to be quoted on order
Description:
Care spray for all stainless steel surfaces and parts made from chrome, brass and aluminium.
Field of Application:
Removes minor contamination such as dust, cleaning streaks and fingerprints.
Suitable for use on stainless steel, chrome, brass, anodised and enamelled metal surfaces. Primarily suitable for larger surfaces due to its oily nature.
Advice:
For an optimal result, the product should be sprayed only onto dry surfaces and then wiped with a soft cloth.
Long Lub H1 is a safe food grade lubricant that is used to ensure the lifting runners do not stick over time due to spills and usage over time. For all health and safety info refer to data sheets below
£9.95 +VAT
P&P to be quoted on order
Description:
Physiologically harmless, synthetic adhesive lubricant for the food, drink and pharmaceutical industries in line with USDA H1.
Field of Application:
For lubricating chains, ropes, open gear drives, levers, joints, linkages, hinges, sliding points and bearings for which there is a danger of direct contact between the lubricant and foodstuffs.
Advantages:
Produces a film resistant to spray and salt water.
Extraordinary corrosion protection.
Thixotropic properties prevent running.
Minimises wear and friction.
Solvent-free, physiologically harmless and non-toxic formula.
User friendly and environmentally friendly.
Advice:
This information is only a recommendation based on our experience. Users must always conduct tests before using the products.
24 volt Reed Switch is fitted with the E.K.D large metered Fob, wired directly to the MDU back panel to control product shut off when the keg runs empty. this functions stops gas being dragged into the lines and avoids having to pull through.
£9.95 +VAT
P&P to be quoted on order
Multi-Flow Electronic control panel replacement. The control panel manages all flow and memory functions for the unit. The panel comes with quick release sprung mounts for easy access. Tools required 1 small flat head screw driver. Always read the manual before changing.
£227.59 +VAT
P&P to be quoted on order