The V6 & V12 MDU (Multiple Dispense Unit) is a high performance dispense unit. Made in the UK with stainless steel frame and casing. Using the Multi-Flow patented electronic metering system the unit can be set to any size of dispense with two memory settings. Once programmed you can select from pint or half and back again simply selecting a preset memory button. The memory can be programmed to any volume size desired.

 

Using the unit is very easy – simply place the cups in the tray, push the handle down and the cups will lift. When they reach the lock height, let go and the system will automatically start to fill. Once the cup is full, it will automatically stop. Lift the handle to lower allowing the tray to be removed. Lowering the handle at any stage will stop the serve.

• Consistent serve each time

Each control has the ability to top up if required; using the system can greatly increase the amount of volume served by one person, this can give an uplift in overall sales of up to 40% versus a standard free flow font set up; a reduction in waste by 25%; a reduction in staff numbers as one person is now dispensing 6 pints every 12 to 14 seconds *speeds can vary depending on product type;

 

• No need for 22oz oversized glasses

You can use standard 20oz saving 10% on each serve; the unique Empty Keg Detector will stop the serve when a keg is empty, then allowing the serve again once the keg has been changed, no pull through required, straight back to serving the next drinks. This greatly reduces the off-sale period for a keg change.

 

• Unique design

The Unit is designed to serve two different products at a time or all the same. The versatility of the system means you can select one serve or all six. Different types of products can be served from lagers to ciders to beers. Cellar equipment can be as little as an EKD and a gas secondary valve. No meter, no motors and no transformers. Installation time is the same as a free flow tap install.

‘We have had metered 6 out old style Multiple Dispense Units at the Football Club for around 15 years, we had the same type of MDU with the similar metered technology years earlier in other parts of the ground too. They were good overall but temperamental at times, relatively slower per individual pint and because they were metered, we had to use oversized pint to line glasses, giving away around 10% more beer each pint poured than a standard free flow pump.’

 

‘Carlsberg came to us with the idea to test out upgraded MDU’s from Multi-Flow Dispense, so we agreed. The new MDU’s are easy to use, pour 6 pints in a little over half the time of the old metered ones. The cellar equipment is much easier to maintain and use.’

 

‘The Multi-Flow team have been great in helping install the new MDU’s and making sure they work properly, we are now looking at other areas of the ground that we can install more.’

 

“Michael Hodgetts”

Catering Manager – Burnley FC

Mick Shaw, 28 years’ experience in the drinks dispense trade.

 

We recently installed 6 of the Multi-Flow V6 MDU’s in the Principality Stadium Cardiff, with more being installed. The first units were installed in time for the Six Nations matches and performed flawlessly. The stadium staff and management were extremely pleased with the performance and ease of use of the units.

 

We decided to go with the Multi-Flow Dispense MDU unit for the following reasons:

 

• There are currently over 200 Multi-Flow V6 MDU units in stadiums or being used by event companies in addition to several National & Regional Brewers in the UK and EU with no recorded break downs.
• Strong feedback from other National brewer’s technical teams.
• All the individual components are plug and play so very easy to service and or repair.
• UK manufactured with a good back up of spares and service should it be needed.
• Installation is very engineer focused for ease of install, incorporating a simple free flow install technique.
• The dispense nozzle isn’t located at the base of the cup for Guinness during pour which has less effect on the condition of the head as it leaves the product.
• They use the standard Guinness nozzles that ensures correct product specifications.
• The unit price is considerably lower than competitor’s making the Multi-Flow MDU very cost effective for the return on investment
• The quality of build in stainless steel ensures longevity and is second to none.

 

Overall, the unit performs very well, easy to install and use, no complicated old fashioned metered installs or special training needed.

 

In my opinion, I am very satisfied with the unit and the support given by Multi-Flow Dispense Ltd.

 

We look forward to working with Multi-Flow Dispense on future projects.

 

“Michael Shaw” Diageo Dispense Innovation.

Diageo Technical Service UK.

The Multi-Flow Dispense V6 MDU unit has been a great product since it has been installed, dispensing multiple pints in one serve will always trump the traditional methods of dispense in major draught – led events.

 

The unit enables staff member the ability to perform other tasks while the liquid is filling the cups which speeds up transaction times, reduces labour, and drives efficiency.

 

I am pleased with the performance and how easy the unit is to operate, I look forward to working with Multi-Flow Dispense further.

 

“Ejai Smith” Food and Beverage Logistics Manager.

Levy UK located at Tottenham Hotspur FC.