Multi-Flow Electronic control panel replacement. The control panel manages all flow and memory functions for the unit. The panel comes with quick release sprung mounts for easy access. Tools required 1 small flat head screw driver. Always read the manual before changing.
24 volt Reed Switch is fitted with the E.K.D large metered Fob, wired directly to the MDU back panel to control product shut off when the keg runs empty. this functions stops gas being dragged into the lines and avoids having to pull through.
Long Lub H1 is a safe food grade lubricant that is used to ensure the lifting runners do not stick over time due to spills and usage over time. For all health and safety info refer to data sheets below
Pricing
£9.95 +VAT
P&P to be quoted on order
Description:
Arecal LONG LUB H1 high-pressure adhesive lubricant with NSF approved
400ml
Physiologically harmless, synthetic adhesive lubricant for the food, drink and pharmaceutical industries in line with USDA H1.
Field of Application:
For lubricating chains, ropes, open gear drives, levers, joints, linkages, hinges, sliding points and bearings for which there is a danger of direct contact between the lubricant and foodstuffs.
Advantages:
Produces a film resistant to spray and salt water.
Extraordinary corrosion protection.
Thixotropic properties prevent running.
Minimises wear and friction.
Solvent-free, physiologically harmless and non-toxic formula.
User friendly and environmentally friendly.
Advice:
This information is only a recommendation based on our experience. Users must always conduct tests before using the products.
Inox spray is a high quality stainless steel cleaner to keep your unit in best condition and look. Will protect against stains and grease marks, for further info refer to technical data sheet.
Pricing
£9.95 +VAT
P&P to be quoted on order
Description:
Inox Finish Spray
400ml
Care spray for all stainless steel surfaces and parts made from chrome, brass and aluminium.
Field of Application:
Removes minor contamination such as dust, cleaning streaks and fingerprints.
Suitable for use on stainless steel, chrome, brass, anodised and enamelled metal surfaces. Primarily suitable for larger surfaces due to its oily nature.
Advice:
For an optimal result, the product should be sprayed only onto dry surfaces and then wiped with a soft cloth.
24 volt power pack, pre-set for the V6 and V12 MDU, requires kettle lead, for further info refer to data sheet below.
Pricing
£80.85 +VAT
P&P to be quoted on order
Product Overview
GST120A24-P1M is GS120 series 120W AC-DC industrial adaptor. It complies with EISA 2007, NRCan, AU/NZ MEPS and EU ErP. It includes short circuit, overload, over voltage, over temperature. Approved by UL60950-1, CSA C22.2, TUV EN60950-1, PSE J60950-1 (except for 48V).
Output DC voltage is 24V, output rated current is 5A, output rated power is 120W
Input voltage range from 85 to 264VAC, 120 to 370VDC – efficiency is 81%
Universal AC input/full range, built-in active PFC function
No load power consumption
0.5W, energy efficiency level Ⅴ
3 pole AC inlet IEC320-C14, class I power
Fully enclosed plastic case, LED indicator for power on
